How to Build a PC for Beginners? What are the Things to keep in Mind.

Hello friends, if you want to upgrade pc or build pc for the first time, then this post is for you. This post may be important for you. Please read this post till the last.

PC Build means that you have complete control over it. You can make any changes to it as per your budget and wish, keeping in mind your needs, you can make it even better and faster.

Important Thinking for Build a PC:

Before you want to build a pc, you need to know for what purpose you need the pc.

There is an invisible risk when building a computer that you rarely have to worry about with an assembled PC.

Make sure you’re building your PC in a room with a bare floor if you can — carpets generate a lot of static — and wear rubber-soled shoes instead of socks. Many components are shipped in antistatic bags, so leave them in the bag until just before installation.

Tools for PC building:

You will need a few tools when building a pc, if you have all the essentials available you will have an easier time.

  • Screwdriver
  •  Screw tray
  • Hex nut driver
  • Flashlight or headlamp
  • Adjustable wrench
  • Hemostat
  • Flathead screwdriver
  • Rubber bands
  • Vise grip

Key Components to Build a Basic PC:

Friends, by using all these things, you will get an over-in-all experience of how to apply them.

  1. We will show you a basic pc build in which we will use Ryzen5 3600 processor.
  2. With this, we will be using a B550 motherboard.
  3. After this, we will use Raksair Visions LPS 8Gb Ram which you will get easily.
  4. There are 2 things for storage, one is your WD Blue SN570 and an EVERSTORE Surveillance 1TB Hard Disk.
  5. After that, to power the entire setup, the cooler master MWE 650 bronze is a good power supply.
  6. And the last one in which we will use a graphics card is the colorful Nvidia geforce gts 1650 NB 4GD6.

After buying all these items, now it is time to add them.

  • First of all, we will put the processor in the motherboard, while putting the processor in the motherboard, we have to take care of some things, if we put the processor in the wrong way, then it can also break. In Ryzen’s processor, you will see 4 pins on its bottom side, as many pins are in the processor, you will see the same number of pins in the motherboard socket. You have to keep in mind that the pins of the processor are well attached to the socket.
install processor
  • After installing the processor, now it is my turn to install the fan. The fan is placed on the top side of the processor. And its cable is attached to a header named CPU fan on the back side of the motherboard.
image 2
  • Now in the next setup, we will install Ram, we will install 2 sticks of 8 GB in it.
image 1
  • After Ram we will install Ssd storage, after installing Ssd we put the heatsink on top of it, side paper comes on the back side of the heatsink with gum it will stick to it only after removing it. Then you have to close the knot.
image 4
  • After doing this we will connect the motherboard with the cabinet. There are two parts of the cabinet, one is your front end which people usually see which is fitted with glass, and the back end of the 2nd cabinet from which you have to do all the wiring and cabling. Inside the cabinet, you will find many nuts which you have to connect to the motherboard.
  • After connecting the motherboard to the cabinet, it is now time to attach the power supply to the cabinet.
image 3

Install the Power Supply

You have to keep in mind that, the first component to make its way into the case should be the power supply (PSU). It is usually located at the rear and is visible on the bottom, but in older chassis, it may be on the top.

In most cases, the PSU is designed to have the fan facing down and taking in cool air from outside. You may need to remove a PSU mounting plate on your case, but most will require you to push the PSU from inside, behind the case.

Close it with a screw or thumb screw.

Leave a Comment